Nova HS Ultra Lift & Slide
It is used to construct large lift-and-slide doors with the narrowest center post available on the market, measuring only 25 mm. The ULTRA variant is an ideal solution for customers seeking a unique, minimalist design in a cost-effective version. This system stands out for its versatility and high performance, thanks to the use of a tight labyrinth strip, modern TPE gaskets, and ANTI-BI-METAL technology, which prevents door deformation caused by significant temperature differences.

Technical Details:
Transmittance: Uw ≥ 0,7 (W/m²K)
Air permeability: Class 3
Water tightness: Class 8A
Wind resistance: Class C3/B3
Narrow mullion: 25 mm
Min. visible frame width: 37 mm
The depth of leaf: 78 mm
Max. glazing packet thickness: 59 mm
Maximum leaf dimensions: (W) 3300 mm, (H) 3300 mm
Maximum leaf weight: 600 kg

Design & functionality:
-
Option to construct structures in all fitting configurations.
- Narrow mullion solution – only 25 mm.
- Integration with a smart home system for management via smartphone and/or touch panel.
- A wide range of fittings from renowned suppliers: Siegenia, G-U, HAUTAU, MACO.
- The Ultra variant of the sliding doors can be equipped with elegant, multi-colored LED lighting.
- Standard glass installation method: the glass is bonded to only one edge of the narrow mullion profile.
- Option to fully integrate the door frame into the thermal insulation layer.
- Possibility of creating a pocket door sliding structure.
- The system allows for the construction of all-glass corners at angles of +/- 90°.
- Option to equip the door with anthracite central, acoustic, and glazing seals.
- Option to enhance the doors with anthracite ABS trim and injected masking elements.






Insulated Glazing.
Triple Glazing Package:
Triple glazing is produced similarly to double glazing but uses three sheets of glass, separated by two Warm Edge spacers. The total thickness of a triple glazing unit is typically 42 mm and is mainly installed in profiles with a minimum construction depth of 70 mm.
Standard / Premium configurations possible:
- 4S + 4F + 4Lowe + Ar + WE
- Neutral Glass SN 70/37 + 4F + 6 Lowe + Ar + WE
- 6mm SKN 176 II ESG, MCM + 4mm F + WE-N + Laminated 44.2 Lowe, MCM, Ar 90% + pressure valve
- 4.4.2Lowe + 4F + 4.4.2 Lowe + Ar + WE

Types of glass used in insulated glazing:
-
Float Glass (clear):
Produced by floating a continuous strip of glass using the “float” technology.
- Low-E Glass (low emissivity): A clear, transparent glass coated with a metal oxide film. This film allows light to pass through while reducing heat transfer, thus minimizing heat loss.
- Solar Control Glass (4 Season): A flat glass with a special transparent coating. It reflects long-wave infrared radiation and a large portion of solar energy.
- Reflective Glass: A monolithic, reflective glass obtained by vacuum deposition using magnetron technology (soft-coat, OFFLINE) or pyrolytic technology (hard-coat, ONLINE).
- Ornamental Glass: Features a textured surface, available in a wide range of patterns and colors.
- Tinted Glass: Created by adding metal oxides during the melting process, this glass absorbs a significant amount of solar energy, preventing excessive heat entry.
- Duplex Glass (anti-burglary / laminated): A laminated glass made by bonding two sheets of float, tinted, reflective, or ornamental glass with one or more layers of polyvinyl butyral (PVB) film. It is available in transparent, colored, or opaque options and is known for its rigidity, adhesion, and elasticity. In the event of impact, PVB films hold the glass fragments together.
- Tempered Glass: Treated through a special process to improve surface flexibility. When broken, it shatters into very small pieces, reducing the risk of injury.



Warm Edge Spacer:
Also known as the “warm spacer,” it is used to separate the glass panes in triple or double glazing. This spacer has a significantly lower linear thermal transfer compared to traditional aluminum spacers. Made of a thermoplastic composite material, the Warm Edge spacer is a poor thermal conductor, resulting in more efficient edge insulation.

Warm Edge Standard

Swisspacer Black

Swisspacer Brown

Swisspacer Grey
Wood Effect:
* These colours are orientative and may present some difference due to chromatic variations of screen calibration.
Polar Oak
White Oak
Mat Colours:
* These colours are orientative and may present some difference due to chromatic variations of screen calibration.
7016 MAT
9007 MAT
7042 MAT
9006 MAT
7035 MAT
9016 MAT
9010 MAT
1013 MAT
3004 MAT
6005 MAT
5010 MAT
8001 MAT
8007 MAT
8017 MAT
8019 MAT
FS Colours:
* These colours are orientative and may present some difference due to chromatic variations of screen calibration.
7021 FS
7016 FS
7024 FS
9007 FS
7042 FS
9006 FS
7035 FS
9016 FS
9010 FS
1013 FS
3004 FS
6005 FS
5010 FS
8001 FS
8007 MAT
8017 FS
8019 FS
Metallic FS Colours:
* These colours are orientative and may present some difference due to chromatic variations of screen calibration.
MET 01 FS
MET 02 FS
MET 03 FS
MET 04 FS
MET 05 FS
MET 06 FS
MET 07 FS
MET 08 FS
MET 09 FS
MET 10 FS
MET 11 FS
MET 12 FS
MET 13 FS
MET 14 FS
MET 15 FS
Anodized Colors:
* These colours are orientative and may present some difference due to chromatic variations of screen calibration.
C0
R0
C33 MIN
C33 MAX
R33
C34 MIN
C34 MAX
R34