Standard 45° Shutter System
-
The Standard 45° roller shutter system features front-mounted insulated aluminum slats and is available in RAL colors and wood imitations. These high-quality shutters can be operated manually or through a motor with a switch, remote control, or crank.
- The Standard roller system can also be installed after the window installation, allowing the roller box to integrate seamlessly into the building’s design. The colors of the shutters can be matched to the exterior of the building or the window.
- The shutter is designed with a box cut at a 45-degree angle, making it ideal for existing windows or facades. This type of system offers a straightforward solution in both technical and economic terms. The size of the box is determined by the total height of the shutter and the type of armoring, which influences the chosen installation method.
- When lowered, the shutter serves as an additional barrier for the building’s openings while providing insulation properties. The stiff polyurethane foam filling the profiles enhances thermal insulation. Additionally, the air layer created between the lowered shutter and the window or door reduces heat exchange between the interior and exterior environments. This design helps save thermal energy needed for heating while protecting against excessive heat on hot days.
- Versions with or without mosquito nets are also available.
TYPE OF INSTALLATION A
The whole shutter is installed on the building facade.
The drive (belt or cord) are conducted through the rear of the box, then through an opening in the wall into the rooms. We perform this installation after the installation of windows.
TYPE OF INSTALLATION B
The whole shutter is screwed on a window frame.
The output of the drive (cord) is through the window frame. One should remember that one should insert the box of the shutter with the placed guide rails into the window recess.
TYPE OF INSTALLATION C
The shutter is installed in the reversed window recess.
Remember that between the shutter and the window there would be a place for the opening of the revision cover. Also take into consideration that the armour is also reversed (from the outside we can see its back).
Standard 45° with mosquito net
- The version with a mosquito net protects the room effectively against the access of insects, as well as any kinds of pollen, leaves and dirt. At the same time it does not limit access to air and daylight. The maximum width of the box with mosquito netting is 1.5 m.
Type of installation A
Type of installation B
Type of installation C
Box Sizes:
Box Sizes with mosquito net:
Box Colors:
* These colours are orientative and may present some difference due to chromatic variations of screen calibration. Not all components are available in all colors!
10 Smooth Anthracite
11 Palisander
12 Anthracite
14 Creamy White
17 Chocolate
18 Black Ulti-Matt
22 Mahogan
30 Walnut
34 Swamp Oak
38 Dark Oak
42 Woodec Oak
48 Gold Oak
53 Siena Noce
54 Winchester
55 Sheffield Oak
61 Gray Quartz
62 Gray Basalt
63 Gray Basalt Smooth
66 Green
94 Light Grey
95 Alu. Brushed
96 Light Silver
97 Graphite metallic
99 Dark Grey
Slats Details:
LA-39
Slat height: 39mm
Number of slats per 1m height: 26 pcs
Maximum width of the shutter: 2500 mm
Maximum area of the shutter: 6,5 sqm
Weight per sqm: 2,8 kg
LA-45
Slat height: 45mm
Number of slats per 1m height: 23 pcs
Maximum width of the shutter: 3000 mm
Maximum area of the shutter: 6,5 sqm
Weight per sqm: 2,9 kg
LA-52
Slat height: 52mm
Number of slats per 1m height: 19 pcs
Maximum width of the shutter: 3700 mm
Maximum area of the shutter: 8,0 sqm
Weight per sqm: 3,0 kg
Slats Colors:
* These colours are orientative and may present some difference due to chromatic variations of screen calibration. Not all components are available in all colors!
01 Silver
02 White
03 Grey
04 Dark Beige
05 Beige
08 Dark Brown
09 Brown
13 Green
15 Cream
16 Ivory
19 Bordo
20 Black
22 Mahogany
23 Anthracite
30 Walnut
34 Wenge
48 Golden Oak
Automations:
-
Automating roller shutters is straightforward, requiring only the installation of a tubular motor inside the tube around which the slats are rolled.
- The shutters can be controlled automatically via a smartphone with the Tahoma Switch, through a simple wall switch, or with a radio remote control. Automated roller shutters eliminate any manual effort and ensure the house is securely closed.
- The remote controls feature multiple channels, allowing a single remote to operate various shutters. Each channel can be set to control one or more shutters, and these settings can be easily adjusted according to your preferences.
We are the distributor of the drives of the company SOMFY. We have the status of SOMFY EXPERT assigned by SOMFY to companies that took part in appropriate training sessions and have an appropriate level of knowledge about the company’s products.
Somfy motors with remote control:
Boost RTS
Altus IO
Oximo IO (obstacle detection)
Oximo S IO (obstacle detection)
RS 100 HYBRID IO
Somfy SITUO
A complete range of modern basic controls following Somfy’s new design guidelines. Thanks to its modern finish, it blends in perfectly with your interior and fits into any room in the house. A pleasant touch, a perfect grip and a discreet wall mount; every detail has been thought of for your daily comfort. Easy to use with its up / stop / down functions. Available in both single-channel and 4+1 configurations.
Somfy SMOOVE
Meet the versatile SMOOVE, a touch-sensitive RTS wall switch, displaying open and close functionality. This sleek one-channel surface-mounted control unit offers discreet feedback and operates on batteries, eliminating the need for wiring. Wireless control unit. Can be placed anywhere. No cabling. The single channel control is easy to program and use, featuring raise, lower and stop functions for easy operation of a Somfy product.
Somfy NINA
Elevate your smart home journey with the Somfy NINA IO, a centralized remote control. Seamlessly control and monitor various devices through intuitive home automation, optimizing comfort, security, and ease of use. Experience comprehensive control at your fingertips and enjoy the convenience of managing your smart devices effortlessly from a single source.
Somfy motors with switch:
Solus PA WT
Boost WT
Solus PP WT (obstacle detection)
Ilmo WT (obstacle detection)
Somfy Key Switch
Control your equipment with a secured access. Design and robust with its steel casing. Delivered with 3 keys.
Somfy Inis Switch
Motorize your home with a simple and easy to integrate wall switch. Easy to integrate in all decors. Choice bewteen 2 design models to fit all interior styles. Timeless and elegant design. Color / Finish White. Protection IP 20.
Somfy TaHoma® switch
From smart application to home automation, the most complete & evolutive connected experience with the TaHoma environment. From the touch of a button, to app control, all the way to voice control, TaHoma switch offers an accessible to all and scalable smart home solution. TaHoma switch is also compatible with Google Assistant and Amazon Alexa enlarging the user experience to voice control.